View/Change Diagram

911 1989-94 - Rear Axle

View/Change Diagram

Boxster 1997-04 - Transmission

This item may need to be sourced from Germany and would take 2-4 weeks to arrive. Once ordered it cannot be canceled. Please call to check stock or request expedited shipping.

View/Change Diagram

Boxster 1997-04 - Front Axle/Steering	Boxster 1997-04 - Rear Axle
911 1998-05 - Front Axle/Steering	911 Turbo/GT2 2001-05 - Front Axle/Steering
911 Turbo/GT2 2001-05 - Rear Axle	911 GT3 2003-05 - Front Axle/Steering
911 GT3 2003-05 - Rear Axle

We also suggest purchasing new installing hardware: pan head screw m6 x 16, part # 90006711704 and sensor seal, part # 90017403240 sold individually.

This item may need to be sourced from Germany and would take 2-4 weeks to arrive. Once ordered it cannot be canceled. Please call to check stock or request expedited shipping.

View/Change Diagram

911 1994-98 - Front Axle/Steering

911 1994-98 - Rear Axle

This item may need to be sourced from Germany and would take 2-4 weeks to arrive. Once ordered it cannot be canceled. Please call to check stock or request expedited shipping.

View/Change Diagram

Boxster 1997-04 - Front Axle/Steering	Boxster 1997-04 - Rear Axle
911 1998-05 - Front Axle/Steering	911 1998-05 - Rear Axle
911 Turbo/GT2 2001-05 - Front Axle/Steering	911 Turbo/GT2 2001-05 - Rear Axle
911 GT3 2003-05 - Front Axle/Steering	911 GT3 2003-05 - Rear Axle

Known as: speed sensor f 92gs8 61000>>

View/Change Diagram

928 1983-86 - Brakes/Wheels	928 1987-91 - Brakes/Wheels
928 1992-95 - Brakes/Wheels

Known as: repair kit sensor

View/Change Diagram

Cayenne 2003-06 - Rear Axle

View/Change Diagram

Cayenne 2007-10 - Brakes/Wheels

Cayenne 2011-14 - Brakes/Wheels

Having problems with your check engine light? Want to run cat bypass pipes or a free flowing sports catalyst set up on your vehicle without having to reprogram the dme (ecu)? This adapter offsets the oxygen sensor about 1.5 inch from the gas stream. This achieves, in most cases, a sufficient measurement for the air/co ratio and increases the tolerance range between the pre and post cat oxygen sensors. In addition, the sensitivity of the oxygen sensor is also reduced allowing you to run a nearly any exhaust or catalytic set up, including bypass pipes, without the need to reprogram your ecu! Use only for the 2nd oxygen sensor (after catalytic)!

This item may need to be sourced from Germany and would take 2-4 w...(choose a part on the right to read more)

General Fitment

Sport exhaust (set) sound
With 200 cells trimetal-catalytic

+7 kw (10ps)

+10 nm

The export sound version of our FVD sport mufflers gives your Porsche a more pronounced, aggressive sound compared to our TUV sound version mufflers. These end-mufflers are much less restrictive than the factory system and produce more power with increadible sound! This system is for the person who truly wants to hear the deep, throaty sound their Porsche is capable of.

Reuses factory tips or any aftermarket tip designed to fit OEM exhaust.
this exhaust comes with 200 cell catalytics

No dme software necessary as catalytic is post o2 sensor.

Tech tip: for older cars repair-kit
FVD mk 987001

FVD exhaust s...(choose a part on the right to read more)

General Fitment

Sport exhaust (set) sound
Without catalytics

+7 kw (10ps)

+10 nm

The export sound version of our FVD sport mufflers gives your Porsche a more pronounced, aggressive sound compared to our tÜvsound version mufflers. These end-mufflers are much less restrictive than the factory system and produce more power with increadible sound! This system is for the person who truly wants to hear the deep, throaty sound their Porsche is capable of.

Reuses factory tips or any aftermarket tip designed to fit OEM exhaust.


No dme software necessary as catalytic is post o2 sensor.

Tech tip: for older cars repair-kit
FVD mk 987001

FVD exhaust systems carry a 2 year warranty!

Fits: s 3.4, 217 kw (...(choose a part on the right to read more)

General Fitment

Kit includes:
Ecu software (flashclient cable), sport air filter, headers, 200 cell catalytics,sport center muffler.

Genuine:
Engine - 6 cylinder boxer
Capacity - 3387ccm
Compression ratio - 11,1:1
Max. Power - 217kw (295hp) @ 6250rpm
Max. Torque - 340nm (251lbf ft) @ 4400-6000rpm
Max. Speed - 275km/h
Max. Rpm - 7200rpm
Acceleration 0-100km/h - 5.4s

Tuning:
Max. Power - 235kw (320hp) @ 6500rpm
Max. Torque - 365nm (269lbf ft) @ 5000-5500rpm
Max. Speed - 280km/h
Max. Rpm - 7500rpm
Acceleration 0-100km/h - 5.0s

For 27 + years, FVD-Brombacherhas been setting the standard for Porsche engine building and tuning in Germany. Our deep understanding of the flat 6 Porsche engine naturally led to ou...(choose a part on the right to read more)

General Fitment

Genuine:
Engine - 6 cylinder boxer
Capacity - 2687ccm
Compression ratio - 11,3:1
Max. Power - 180kw (245hp) @ 6500rpm
Max. Torque - 273nm (199lbf ft) @ 4600-6000rpm
Max. Speed - 258km/h
Max. Rpm - 7200rpm
Acceleration 0-100km/h - 6.1s

Tuning:
Max. Power - 204kw (277hp) @ 6500rpm
Max. Torque - 301nm @ 4500-6000rpm
Max. Speed - 269km/h
Max. Rpm - 7400rpm
Acceleration 0-100km/h - 5.8s

For 27 + years, FVD-Brombacherhas been setting the standard for Porsche engine building and tuning in Germany. Our deep understanding of the flat 6 Porsche engine naturally led to our engine management software. Over the years we have perfected the art of software tuning, making substantial gains in horsepower and...(choose a part on the right to read more)

General Fitment

Kit includes:
Ecu software (flashclient cable) and sport air filter

Genuine:
Engine - 6 cylinder boxer
Capacity - 3387ccm
Compression ratio - 11,1:1
Max. Power - 217kw (295hp) @ 6250rpm
Max. Torque - 340nm (251lbf ft) @ 4400-6000rpm
Max. Speed - 275km/h
Max. Rpm - 7200rpm
Acceleration 0-100km/h - 5.4s

Tuning:
Max. Power - 227kw (308hp) @ 6500rpm
Max. Torque - 355nm (262lbf ft) @ 5000-5500rpm
Max. Speed - 278km/h
Max. Rpm - 7500rpm
Acceleration 0-100km/h - 5.2s

For 27 + years, FVD-Brombacherhas been setting the standard for Porsche engine building and tuning in Germany. Our deep understanding of the flat 6 Porsche engine naturally led to our engine management software. Over the years we h...(choose a part on the right to read more)

General Fitment

This is a brand new, high performance cylinder head for a Porsche 914 2.0l. Made from an aa 2.0l 914 casting with breather, heads comes with stainless steel 42mm intake and a stainless steel 36mm exhaust valves, with harden keepers, chromoly retainers, and single high rev springs. It's ready to install. Made from an aa 2.0l type 4 casting with breather using 8mm valve stems it is available with both single or dual high rev springs. The head can also be opened to 103 to accommodate the larger bore sizes (call us to inquire). Sold as each.
The hole for head temp sensor is not drilled but it can easily be done by you or a machine shop.
If you would like it drilled there is a $90 charge.

View/Change Diagram

914 1970-76 - Engine

This is the sending unit for the factory temperature gauge on all of the above captioned models. this sending unit has one pole and if yours has two order the 928 606 20101 part
Known as: temperature sensor

View/Change Diagram

924 1976-79 - Electrical	924 1980-85 - Electrical
944 1982-85 - Engine	944 1982-85 - Electrical